Ei Electronics Ei262 Especificaciones descargar pdf (Pagina 9)

3. ALARM POSITIONING

3.1 IDEALLY A CARBON MONOXIDE (CO) ALARM SHOULD BE INSTALLED IN:

- Every room containing a fuel burning appliance

- Remote rooms where occupants spend a considerable amount of time

- Every bedroom

However if the number of CO Alarms is limited, the following points should be considered when deciding

where best to fit the alarm(s)

- If there is an appliance in a room where people sleep, place a CO Alarm in this room

- Locate a CO Alarm in a room containing a flueless or open-flued appliance

- Locate a CO Alarm in a room where the occupant(s) spend most of their time (e.g. living room)

- In a bedsit, the CO Alarm should be placed as far away from the cooking appliance as possible, but

near to where the occupant sleeps

- If the appliance is in a room not normally used (such as a boiler room) the CO Alarm should be placed

just outside the room so that the alarm will be heard more easily

3.2 UNSUITABLE LOCATIONS

Do not place the CO Alarm in any of the following areas

- In the immediate vicinity of a cooking appliance

- Outside the building

- In an enclosed space (e.g. in or below a cupboard)

- In a damp or humid area

- Directly above a sink or cooker

B16587-R0-262-UC-ENG 15/4/09 3:38 PM Page 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

Sin comentarios

Ei Electronics Ei262 Especificaciones Pagina 9